Conduits
Conduits/Piping/Tubing available in 3 mtr /10 ft lengths.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HC1 | 2.02 |
| 1.5″ | Stainless Steel | 316 | HC1.5 | 3.10 |
| 2″ | Stainless Steel | 316 | HC2 | 4.20 |
| 2.5″ | Stainless Steel | 316 | HC2.5 | 6.43 |
| 3″ | Stainless Steel | 316 | HC3 | 8.50 |
| 4″ | Stainless Steel | 316 | HC4 | 10.50 |
Joiners
Used to join Conduits to Conduits, Bends, Tees, Footplates, Bulkheads and Reducers.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HJ1 | 0.11 |
| 1.5″ | Stainless Steel | 316 | HJ1.5 | 0.14 |
| 2″ | Stainless Steel | 316 | HJ2 | 0.26 |
| 2.5″ | Stainless Steel | 316 | HJ2.5 | 0.31 |
| 3″ | Stainless Steel | 316 | HK3 | 0.32 |
| 4″ | Stainless Steel | 316 | HJ4 | 0.49 |
Sockets & Bushes
Used for entry to Panels, Inspection Boxes and Trunkings. Used with Hycon O & S.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HS&B1 | 0.08 |
| 1,5″ | Stainless Steel | 316 | HS&B1.5 | 0.13 |
| 2″ | Stainless Steel | 316 | HS&B2 | 0.21 |
| 2.5″ | Stainless Steel | 316 | HS&B2.5 | 0.26 |
| 3″ | Stainless Steel | 316 | HS&B3 | 0.33 |
| 4″ | Stainless Steel | 316 | HS&B4 | 0.45 |
90′ Bends
Used as an integral part of the Hycon Containment System for 90 degree routing or as an exit point.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HB901 | 0.13 |
| 1.5″ | Stainless Steel | 316 | HB901.5 | 0.28 |
| 2″ | Stainless Steel | 316 | HB902 | 0.44 |
| 2.5″ | Stainless Steel | 316 | HB902.5 | 0.86 |
| 3″ | Stainless Steel | 316 | HB903 | 1.04 |
| 4″ | Stainless Steel | 316 | HB904 | 2.20 |
45′ Bends
Used as an integral part of the Hycon Containment System for 45 degree routing or as an exit point.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HB451 | 0.09 |
| 1.5″ | Stainless Steel | 316 | HB451.5 | 0.24 |
| 2″ | Stainless Steel | 316 | HB452 | 0.43 |
| 2.5″ | Stainless Steel | 316 | HB452.5 | 0.78 |
| 3″ | Stainless Steel | 316 | HB453 | 1.10 |
| 4″ | Stainless Steel | 316 | HB454 | 2.12 |
Seagull Bend
Used to split and route cabling in two directions.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HBSG1 | 0.12 |
| 1.5″ | Stainless Steel | 316 | HBSG1.5 | 0.23 |
| 2″ | Stainless Steel | 316 | HBSG2 | 0.29 |
| 2.5″ | Stainless Steel | 316 | HBSG2.5 | 0.88 |
| 3″ | Stainless Steel | 316 | HBSG3 | 1.14 |
| 4″ | Stainless Steel | 316 | HBSG4 | 2.38 |
Bend with Tee
Used to route and split cabling from a straight conduit via a bend in two directions.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HB+T1 | 0.14 |
| 1.5″ | Stainless Steel | 316 | HB+T1.5 | 0.43 |
| 2″ | Stainless Steel | 316 | HB+T2 | 0.79 |
| 2.5″ | Stainless Steel | 316 | HB+T2.5 | 0.94 |
| 3″ | Stainless Steel | 316 | HB+T3 | 1.59 |
| 4″ | Stainless Steel | cc | HB+T4 | 2.46 |
Tee
Used as an integral part of the Hycon Containment System to create T junctions or as an exit point.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HT1 | 0.09 |
| 1.5! | Stainless Steel | 316 | HT1.5 | 0.23 |
| 2″ | Stainless Steel | 316 | HT2 | 0.28 |
| 2.5″ | Stainless Steel | 316 | HT2.5 | 0.72 |
| 3″ | Stainless Steel | 316 | HT3 | 1.03 |
| 4″ | Stainless Steel | 316 | HT4 | 2.15 |
Footplates
Used for Floor Support e.g. Floor Stands, Isolators Emergency Stops, Push Button Stations etc.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HFP1 | 0.30 |
| 1.5″ | Stainless Steel | 316 | HFP1.5 | 0.40 |
| 2″ | Stainless Steel | 316 | HFP2 | 0.65 |
| 2.5″ | Stainless Steel | 316 | HFP2.5 | 0.80 |
| 3″ | Stainless Steel | 316 | HFP3 | 1.46 |
| 4″ | Stainless Steel | 316 | HFP4 | 2.50 |
1 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 1 way installations.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| Size A | Stainless Steel | 316 | HIB-A | 1.18 |
| Size B | Stainless Steel | 316 | HIB-B | 1.84 |
| Size C | Stainless Steel | 316 | HIB-C | 2.10 |
2 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 2 way installations.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| Size A | Stainless Steel | 316 | HIB-2W-A | 1.18 |
| Size B | Stainless Steel | 316 | HIB-2W-B | 1.84 |
| Size C | CCCCCCCCC | 316 | HIB-2W-C | 2.10 |
3 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 3 way installations.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| Size A | Stainless Steel | 316 | HIB-3W-A | 1.18 |
| Size B | Stainless Steel | 316 | HIB-3W-B | 1.84 |
| Size C | Stainless Steel | 316 | HIB-3W-C | 2.10 |
4 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 4 way installations etc.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| Size A | Stainless Steel | 316 | HIB-4W-A | 1.18 |
| Size B | Stainless Steel | 316 | HIB-4W-B | 1.84 |
| Size C | Stainless Steel | 316 | HIB-4W-C | 2.10 |
Hycon Reducers
Hycon O Reducers are used to increase the exit point of the conduit to accommodate the glanding (fitting of Grip Cords) of cables or to reduce down to a lower size conduit.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1.5″ to 1″ | Stainless Steel | 316 | HR1.5-1 | 0.12 |
| 2″ to 1″ | Stainless Steel | 316 | HR2-1 | 0.18 |
| 2″ to 1.5″ | Stainless Steel | 316 | HR2.5-1 | 0.24 |
| 2.5″ to 1″ | Stainless Steel | 316 | HOR2.5-1 | 0.36 |
| 2.5″ to 1.5″ | Stainless Steel | 316 | HR2.5-1.5 | 0.50 |
| 2.5″ to 2″ | Stainless Steel | 316 | HR2.5-2 | 0.20 |
| 3″ to 1″ | Stainless Steel | 316 | HR3-1 | 0.26 |
| 3″ to 1.5″ | Stainless Steel | 316 | HR3-1.5 | 0.54 |
| 3″ to 2″ | Stainless Steel | 316 | HR3-2 | 0.54 |
| 3″ to 2.5″ | Stainless Steel | 316 | HR3-2.5 | 0.26 |
| 4″ to 1″ | Stainless Steel | 316 | HR4-1 | 0.32 |
| 4″ to 1.5″ | Stainless Steel | 316 | HR4-1.5 | 0.70 |
| 4″ to 2″ | Stainless Steel | 316 | HR4-2 | 0.54 |
| 4″ to 2.5″ | Stainless Steel | 316 | HR4-2.5 | 0.74 |
| 4″ to 3″ | Stainless Steel | 316 | HR4-3 | 0.90 |
NPT Adaptor
Used to interconnect between Hycon and NPT fittings.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HNPT1 | 0.06 |
| 1.5″ | Stainless Steel | 316 | HNPT1.5 | 0.12 |
| 2″ | Stainless Steel | 316 | HNPT2 | 0.20 |
| 2.5″ | Stainless Steel | 316 | HNPT2.5 | 0.24 |
| 3″ | Stainless Steel | 316 | HNPT3 | 0.30 |
| 4″ | Stainless Steel | 316 | HNPT4 | 0.46 |
Bulkhead
Used for Hycon Ceiling Drops. Can be supported from overhead or within the cleanroom. Also can be used to enter/exit via floor or wall.
| Sizes | Material | Grade | Product Code | Weight |
|---|---|---|---|---|
| 1″ | Stainless Steel | 316 | HBH-1 | 0.65 |
| 1.5″ | Stainless Steel | 316 | HBH-1.5 | 0.85 |
| 2″ | Stainless Steel | 316 | HBH-2 | 1.02 |
| 2.5″ | Stainless Steel | 316 | HBH-2.5 | 1.34 |
| 3″ | Stainless Steel | 316 | HBH-3 | 1.60 |
| 4″ | Stainless Steel | 316 | HBH-4 | 2.30 |
Hycon® Range
Conduits
Conduits/Piping/Tubing available in 3 mtr /10 ft lengths.
Joiners
Used to join Conduits to Conduits, Bends, Tees, Footplates, Bulkheads and Reducers.
Sockets & Bushes
Used for entry to Panels, Inspection Boxes and Trunkings. Used with Hycon O & S.
90′ Bends
Used as an integral part of the Hycon Containment System for 90 degree routing or as an exit point.
45′ Bends
Used as an integral part of the Hycon Containment System for 45 degree routing or as an exit point.
Seagull Bend
Used to split and route cabling in two directions.
Bend with Tee
Used to route and split cabling from a straight conduit via a bend in two directions.
Tee
Used as an integral part of the Hycon Containment System to create T junctions or as an exit point.
Footplates
Used for Floor Support e.g. Floor Stands, Isolators Emergency Stops, Push Button Stations etc.
1 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 1 way installations.
2 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 2 way installations.
3 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 3 way installations.
4 Way Inspection Box
Used on the Hycon installation to allow access to cables, airlines etc. or as a junction box for 4 way installations etc.
Hycon Reducers
Hycon O Reducers are used to increase the exit point of the conduit to accommodate the glanding (fitting of Grip Cords) of cables or to reduce down to a lower size conduit.
NPT Adaptor
Used to interconnect between Hycon and NPT fittings.
Bulkhead
Used for Hycon Ceiling Drops. Can be supported from overhead or within the cleanroom. Also can be used to enter/exit via floor or wall.
